fast-lock-1-1
 

The latest news about refrigeration systems is OLAB FAST LOCK. This special connection system for refrigeration plants can be used with pipes thin (brass, copper and aluminum) and it eliminates the dangerous welding operation


5 GOOD REASONS WHY YOU SHOULD USE FASTLOCK


1.
Because it’s EASY to use.
Extremely ease to assembly and disassembly.
2-1

2.
Because it’s SAFE.
Perfect seal, 1 0 0 % g u a r a n t e e d.
2-2

3.
Because it’s RELIABLE.
Dangerous welding operations no longer needed.
2-3

4.
Because it’s INNOVATIVE,
Chance to connect copper, aluminium and brass pipes.
2-4

5.
Because it’s LOW COST.
Saving on welding operations.
2-5

 

CONNECTION INSTRUCTIONS - SEQUENCE POSITION


A.
Cut off and face the pipe, eliminating any burrs inside and out, then insert the reinforcing bush (1).
3-1

B.
Make sure the bush (1) goes right into the pipe, pressing gently by hand if necessary.
3-2

C.
Loosen the OLA FAST BLOCK locking nut (2).
3-3

D.
Remove the OLAB FAST LOCK components from the fitting and mount them on the pipe in given sequence.
3-4

E.
Insert the pipe in the fitting, moving the nut (2), ogive (4) and O-ring (3), taking care not to damage the gasket.
3-5

F.
Tighten the nut (2) to the torque indicated in Table , pressing slightly to keep it in its seat.
3-6

Table torque
tab2